Simple Roofing Installation Tips

 

Whether you are a DIY enthusiast or not, at some point in time you will most likely require roofing installation. It can either be a do-it-yourself project or you might have to hire professionals. In any case, the point is that it has to be done right. There is no point in the savings of dollars and cents when the roof becomes completely ruined.

When it comes to roofing installation, you will have to decide what sort of roofing material you will use. You might choose asphalt shingles as your material of choice. If you are going to do this on your own, then make sure you get professional chalk line installation. Chalk lines are those that are painted onto the roof and help make sure that the shingles do not slip and slide off the roof.

Another important point you should know about roofing installation is whether you will use metal roofs or whether you will go for wood. Metal roofs are definitely more expensive than wood roofs, but it offers a better long-term protection. Wood is susceptible to weather wear and tear, but you can protect the wood with protective coatings and paints as well. The bottom line is that you need to choose the roofing materials wisely.

A third point you should know about roofing installation is to have an estimate before beginning work. This way you will know how much money you will be spending and this will also give you an idea how much the old roofing material will cost you. Remember that the old roofing material will be very expensive to replace. That is why you need to make sure you have the money available to pay for it.

The last point that you should know about roofing installation is the process of installing new shingles. When you are installing the new roofing felt, it is advisable that you use the same kind of felt that was used on the old roof. This will save you a lot of money. If you don’t want to do that, then just take the measurements of the old roof. You will find that they are very precise and it won’t take long to tell what the size of the new roofing installation will be.

Once you know the basics when it comes to roofing installation, you will be able to handle any problems that might occur at the time of the installation. You may face a few difficulties such as nails that don’t go in right or wrong places, missing pieces of shingles, or nails that pop out. Don’t get upset if something like this happens. Roofing contractors are used to these situations because they happen all the time. They will be able to help you by performing the task again.

During the roofing installation, make sure that the roof is straight. You don’t want to have any water leakages underneath your house. Make sure that the seams are even all the way around. Some roofers prefer tacking the seams but many prefer to cut the seams so that they can drill the joints. It really depends on how comfortable you are with the idea of drilling.

After the entire roofing installation is complete, you should notice that the seams are all even and aligned correctly. Check if the nails were used enough and if the installation was complete and followed the instructions. You can now start using the roofing felt under the ridge. Take extra care to make sure that you are sticking the felt right to the roofing shingle. When you want to install the next batch of roofing nails, you should only use the felt that was previously installed under the ridge.

Leave a Reply